DT600 Dust Monitor
An in-situ dust monitor based on backward scattering of particulate matter, designed for continuous, non-contact measurement of medium to low concentration dust in dry flue gas and process gas applications. Also suitable for corrosive gas environments and potentially explosive gas/dust atmospheres.
Technical data
| Ambient Temperature Range: | -20 to +50 °C | Flue Gas Pressure: | -5 to +20 kPa (G) |
| Measurement Range: | Min. 0-10 mg/m³; Max. 0-1,000 mg/m³ | Flue Gas Temperature: | Up to 350°C |
| Relative Humidity: | 0-95% | Minimum Duct Diameter: | 500mm |
Features & Benefits
Continuous dust measurement
Single-side installation with no optical alignment required
Non-contact measurement
Minimum certified range: 0-10 mg/m³ (CCEP)
Explosion protection certifications: Ex db IIC T6 Gb, Ex tb IIIC T100°C Db
Applications
Continuous Particulate Emission Monitoring for Stationary Sources
Case Studies
Abuja Power Company, Nigeria
Flue Gas CEMS
Algeria Tosyali Steel Plant
Flue Gas CEMS
PetroChina Dushanzi Petrochemical Branch
Flue Gas CEMS